Technical Support is available at:
8.30-12.30; 13.30-17.30 (CET), Mon-Fri
t: +39.0445.697420 (direct)
e: support[at] (ticket)

HOV - WAS: connection diagram

This configuration allows the user to control the Wiper and the Washer from the Camera's web pages or from the VMS.

The IPM housings do not provide the wiper due to PoE+ power limitations. Should a wiper be necessary, a standard housing must be used.






Additional Notes about the Camera

Depending on the system composition, it is necessary to verify if the camera's Digital Outputs can be operated from the selected control interface (Web Browser, VMS Client) in order to activate/deactivate the wiper and the washer pump.

When a VMS is used, the VMS Client must provide suitable controls to open/close the camera's relays. 


Was this article helpful?
0 out of 0 found this helpful
, Enrico Bertani wrote this article.
Have more questions? Submit a request