Technical Support is available at:
8.30-12.30; 13.30-17.30 (CET), Mon-Fri
t: +39.0445.697420 (direct)
e: support[at]videotec.com (ticket)
Follow

MHX - WASEX: connection diagram

This connection diagram depicts how the WASEX's valve must be connected to the MHX housing, for different voltage levels which the housing is fed with.

The Washer control is achieved by the means of an integrated Relay Out, while the Wiper is internally controlled by the unit itself.

In any case, it necessary to use a suitable insulation transformer, in order to disjoin the valve from the power network.

WARNING: the Insulation Transformer must be installed either inside an explosion-proof box, or in a safe zone out from the classified area.

 

Was this article helpful?
0 out of 0 found this helpful
, Daniele Bottini wrote this article.
Have more questions? Submit a request

Comments