Technical Support is available at:
8.30-12.30; 13.30-17.30 (CET), Mon-Fri
t: +39.0445.697420 (direct)
e: support[at]videotec.com (ticket)
Follow

HOV: Wiper control with Camera Relay Out

This configuration allows the user to control the Wiper from the Camera's web pages or from the VMS, operating the camera Relay Out.

An additional external Relay is required to drive the Wiper, which needs more current than what the Camera's relay is usually able to support.

Closing the Camera's relay will enable the external Relay as well, which powers the housing wiper; to stop the wiper, it is enough to deactivate the Camera's relay.

Was this article helpful?
0 out of 0 found this helpful
, Daniele Bottini wrote this article.
Have more questions? Submit a request

Comments