Technical Support is available at:
8.30-12.30; 13.30-17.30 (CET), Mon-Fri
t: +39.0445.697420 (direct)
e: support[at] (ticket)

MPXT: RS485 connection

If a RS485-3 connection (not physically present in the unit) is necessary and the MPXT firmware version is minimum 1_q, there is the possibility to use RS485-2 as RS485-3.

To enable the RS485-3 line, access the MPXT’s OSD, browse to THERMAL CAMERA menu, and set the CONTROL option to EXTERNAL. At the end connect to RS485-2, it will be used like RS485-3.

Was this article helpful?
0 out of 0 found this helpful
, Enrico Bertani wrote this article.
Have more questions? Submit a request